CLEARANCE WARNING BUZZER > REMOVAL |
for Preparation Click here
1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
4. REMOVE NO. 1 CLEARANCE WARNING BUZZER |
Disconnect the connector.
Detach the clamp and remove the No. 1 clearance warning buzzer.