STEREO JACK ADAPTER ASSEMBLY > INSTALLATION |
for Preparation Click here
1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY |
Attach the 2 claws to install the stereo jack adapter.
2. INSTALL SWITCH BASE |
Connect the connectors.
Attach the 8 claws to install the switch base.
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Attach the 3 guides, 2 claws and 3 clips to install the lower instrument panel finish panel.
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
Attach the 2 hinges to install the glove compartment door.
Text in Illustration *1 Hinge
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
Text in Illustration *1 Stopper
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).