STARTER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FRONT FENDER SEAL

  1. Remove the 5 clips and seal.



3. REMOVE STARTER ASSEMBLY


    A226147

  1. Remove the bolt and ground wire.

  1. Disconnect the terminal cap.

  1. Remove the nut and disconnect the starter wire.

  1. Disconnect the starter connector.



    A223812

  1. Remove the 2 bolts and starter.