FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION |
for Preparation Click here
- HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below is for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
1. INSTALL FRONT SEAT CUSHION COVER LH |
Install the front seat cushion cover LH to the front seat inner belt assembly LH.
- HINT:
- Use the same procedure described for the RH side.
2. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
Install the front seat belt anchor plate.
Install the front seat inner belt assembly LH with the nut.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not overlap the anchor part of the front seat inner belt assembly LH and protruding part of the front seat cushion frame sub-assembly LH.
Attach the wire harness to the clamp.
Attach the clamp.
Text in Illustration *1 Protruding Part
3. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH |
Install the front seat belt anchor plate.
Install the front seat inner belt assembly RH with the nut.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Do not overlap the anchor part of the front seat inner belt assembly RH and protruding part of the front seat cushion frame sub-assembly RH.
Attach the wire harness to the clamp.
Text in Illustration *1 Protruding Part
Connect the connector and attach the 2 clamps as shown in the illustration.
Text in Illustration *1 Front
4. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat assembly LH (Click here).
5. INSTALL FRONT SEAT ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.