FLOOR SHIFT ASSEMBLY > REMOVAL |
for Preparation Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Detach the 4 claws and remove the parking brake hole cover.
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Detach the 12 claws and remove the upper console panel.
- NOTICE:
- Be careful not to damage the instrument panel and console box with the claws of the upper console panel.
Text in Illustration *A for 2WD *B for 4WD
5. REMOVE CONSOLE BOX ASSEMBLY |
Remove the 4 screws and 2 bolts.
Using a clip remover, remove the 2 clips and console box.
Text in Illustration *1 Screw *2 Bolt *3 Clip
6. REMOVE FLOOR SHIFT ASSEMBLY |
Disconnect the 2 connectors and clamp.
Move the shift lever to L.
Disconnect the transmission control cable.
Remove the 4 bolts.
Remove the floor shift.