REAR AXLE HUB BOLT > REPLACEMENT |
for Preparation Click here
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL |
2. REMOVE BRAKE DRUM |
3. REMOVE REAR AXLE HUB BOLT |
Temporarily install the 2 nuts to the hub bolts as shown in the illustration.
Using SST and a brass bar or equivalent to hold the axle shaft, remove the hub bolt.
- SST
- 09650-17011
4. INSTALL REAR AXLE HUB BOLT |
Install a plate washer and nut to a new hub bolt, as shown in the illustration.
Using a brass bar or equivalent to hold the axle shaft, install the hub bolt by torquing the nut.
Remove the 2 nuts from the hub bolts.
5. INSTALL BRAKE DRUM |
6. INSTALL REAR WHEEL |
- Torque:
- 105 N*m{ 1,071 kgf*cm , 77 ft.*lbf }