UPPER INSTRUMENT PANEL > DISASSEMBLY

for Preparation Click here



1. REMOVE METER MOUNTING BRACKET


B278235
  1. Remove the screw <B> and meter mounting bracket.



2. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


B206170
  1. Detach the 4 claws and remove the No. 2 instrument panel register.



3. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

HINT:
Use the same procedure described for the No. 2 instrument panel register.


4. REMOVE INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY


B206171

HINT:
Use the same procedure for both instrument panel cup holders.
  1. Remove the 3 screws <B> and instrument panel cup holder.



5. REMOVE NO. 4 INSTRUMENT PANEL CUSHION


B206458
  1. Remove the No. 4 instrument panel cushion.



6. REMOVE NO. 3 INSTRUMENT PANEL CUSHION


B206460
  1. Remove the No. 3 instrument panel cushion.



7. REMOVE NO. 2 INSTRUMENT PANEL CUSHION


B278067
  1. Remove the No. 2 instrument panel cushion.



8. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)


    E229142
  1. Detach the 2 claws and remove the automatic light control sensor.



9. REMOVE LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System)


B277375
  1. Detach the 2 claws and guide and remove the light control switch hole cover.



10. REMOVE COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)


E226877E01
  1. Put protective tape around the cooler thermistor (solar sensor).

  1. Using a screwdriver, detach the 2 claws and remove the cooler thermistor (solar sensor).

    HINT:
    Tape the screwdriver tip before use.
  1. Disconnect the connector.

    Text in Illustration 
    *1
    Protective Tape
    *2
    Cooler Thermistor (Solar Sensor)