AIR FUEL RATIO SENSOR > INSTALLATION |
for Preparation Click here
1. INSTALL AIR FUEL RATIO SENSOR |
Using SST, install the air fuel ratio sensor.
- SST
- 09224-00010
- Torque:
- without SST:
- 44 N*m{ 449 kgf*cm , 32 ft.*lbf }
- with SST:
- 40 N*m{ 408 kgf*cm , 30 ft.*lbf }
- NOTICE:
- This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.81 in.) and SST with a measure of 30 mm (1.18 in.) (Click here).
- This torque value is effective when SST is parallel to the torque wrench.
Connect the air fuel ratio sensor connector and wire harness clamp.
2. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
Install the No. 1 exhaust manifold heat insulator with the 4 bolts.
- Torque:
- 12 N*m{ 122 kgf*cm , 9 ft.*lbf }
3. INSPECT FOR EXHAUST GAS LEAK |