HIGH MOUNTED STOP LIGHT ASSEMBLY (w/o Rear Spoiler) > INSTALLATION

for Preparation Click here



1. INSTALL CENTER STOP LIGHT SET


    E142982
  1. Engage the 2 claws and install the center stop light set with the 2 screws.

  1. Connect the connector.



2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    B193004E01
  1. Put the 3 belts through the slits.

  1. Engage the 3 clips and 5 claws, and install the package tray trim panel assembly.

  1. Connect the connector.



3. INSTALL PACKAGE TRAY TRIM BELT HOLE COVER


    B193005
  1. Engage the 4 claws and install the package tray trim belt hole cover.



4. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH


    B184112
  1. Engage the 2 guides and 4 clips, and install the roof side inner garnish assembly LH.



5. INSTALL ROOF SIDE INNER GARNISH BOARD LH


    B187702
  1. Engage the 2 guides and 2 claws, and install the roof side inner garnish board LH.



6. INSTALL REAR SEAT SIDE GARNISH LH


    B187701
  1. Engage the 2 claws, 2 clips and guide, and install the rear seat side garnish LH.



7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH


    B160421E02
  1. for TMC Made:

    1. Align the alignment mark (pink) on the weatherstrip and the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip LH.

      NOTICE:
      After installation, check that the corners fit correctly.


    B160421E06
  1. for TMMC Made:

    1. Align the alignment mark (red) on the weatherstrip and the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip LH.

      NOTICE:
      After installation, check that the corners fit correctly.


8. INSTALL REAR DOOR SCUFF PLATE LH


    B181959
  1. Engage the 6 claws and install the rear door scuff plate LH.



9. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.


10. INSTALL ROOF SIDE INNER GARNISH BOARD RH

HINT:
Use the same procedure as for the LH side.


11. INSTALL REAR SEAT SIDE GARNISH RH

HINT:
Use the same procedure as for the LH side.


12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    B160422E02
  1. Align the alignment mark (blue) on the weatherstrip and the protruding portion on the body indicated by the arrow in the illustration, and install the rear door opening trim weatherstrip RH.

    NOTICE:
    After installation, check that the corners fit correctly.


13. INSTALL REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedure as for the LH side.


14. INSTALL REAR SEATBACK ASSEMBLY LH
  1. Place the rear seatback assembly LH in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.


    B192720
  1. Install the rear seatback assembly LH with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


    B193337
  1. Install the 2 rear seatback clips.



15. INSTALL REAR SEATBACK ASSEMBLY RH
  1. Place the rear seatback assembly RH in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.


    B192722
  1. Install the rear seatback assembly RH with the 2 bolts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


    B193338
  1. Install the 2 rear seatback clips.



16. INSTALL REAR SEAT CUSHION ASSEMBLY


    B187311
  1. Attach the rear hook of the seat cushion to the seatback.

  1. Attach the 2 front hooks of the seat cushion to the vehicle body.

  1. Confirm that the seat cushion is firmly installed.

    NOTICE:
    When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.


17. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY


18. INSTALL REAR SEAT HEADREST ASSEMBLY


19. INSTALL SPARE WHEEL COVER


    B181975
  1. Install the spare wheel cover.