HEADLIGHT DIMMER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY


    B162671E19
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Light Control Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    12 (EL) - 18 (T)
    OFF
    10 kΩ or higher
    12 (EL) - 20 (H)
    12 (EL) - 18 (T)
    TAIL
    Below 1 Ω
    12 (EL) - 18 (T)
    HEAD
    Below 1 Ω
    12 (EL) - 20 (H)
    Dimmer Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    12 (EL) - 17 (HF)
    HIGH FLASH
    Below 1 Ω
    12 (EL) - 11 (HU)
    12 (EL) - 11 (HU)
    HIGH
    Below 1 Ω
    Turn Signal Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    12 (EL) - 13 (TR)
    OFF
    10 kΩ or higher
    12 (EL) - 15 (TL)
    12 (EL) - 13 (TR)
    RH
    Below 1 Ω
    12 (EL) - 15 (TL)
    LH
    Below 1 Ω
    Front Fog Light Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (LFG) - 4 (BFG)
    OFF
    10 kΩ or higher
    3 (LFG) - 4 (BFG)
    ON
    Below 1 Ω
    If the result is not as specified, replace the switch assembly.