OCCUPANT CLASSIFICATION SYSTEM > DTC CHECK / CLEAR |
for Preparation Click here
- HINT:
- Use the Techstream to read and clear the DTC of the occupant classification ECU, otherwise the DTCs cannot be read or cleared.
DTC CHECK |
Turn the ignition switch off.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON and turn the Techstream on.
Enter the following menus: Body Electrical / Occupant Detection / Trouble Code.
Check the DTCs by following the prompts on the Techstream screen.
- HINT:
- Refer to the Techstream operator's manual for further details.
DTC CLEAR |
Turn the ignition switch off.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON and turn the Techstream on.
Enter the following menus: Body Electrical / Occupant Detection / Trouble Code.
Clear the DTCs by following the prompts on the Techstream screen.
- HINT:
- Refer to the Techstream operator's manual for further details.