NAVIGATION SYSTEM (for Radio and Display Type) > Touch Panel Switch does not Function |
for Preparation Click here
INSPECTION PROCEDURE
- NOTICE:
- After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).
1.CHECK MULTI-DISPLAY |
Check if there is any foreign matter caught between the display and exterior frame of the multi-display.
- OK:
- No foreign matter is caught between the display and exterior frame of the multi-display.
- HINT:
- If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.
|
| ||||
OK | |
2.CHECK TOUCH PANEL |
Check for foreign matter on the display.
- OK:
- The display is clean.
|
| ||||
OK | |
3.CHECK TOUCH SWITCH (OPERATION CHECK) |
Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check (Click here).
Touch the display in the area where the switch malfunction occurs.
- OK:
- A "+" mark appears at the touched position.
|
| ||||
OK | ||
|